16611AA810
DENSO 16611AA810 Yüksek Basınç Enjektörü Subaru BRZ Toyota GR86 2.4L FA24D
SU003-08670, 297500-1430Precision High-Speed Solenoid Multi-Hole Nozzle-200 barTeknik Özellikler
| Özellik | Değer |
|---|---|
| Sistem Tipi | Denso Multi-Hole Direct Gasoline Fuel Injector |
| Çalışma BasıncıTemel Değer | |
| Spray Pattern | 6-hole laser-calibrated spray targeted at boxer piston crown bowl |
| Fuel Rail Bolt Torque | 19 N·m (holding bracket flanged bolts) |
| High Pressure Pipe Torque | 32 N·m Flare Nut Connection |
| Coil Resistance | 1.7 - 2.1 Ω at 20°C (High-speed pulse driver circuit) |
| Tipik Arıza Kodları | P0300 (Random Misfire), P0301-P0304 (Cylinder Misfire), P0171 (System Too Lean) |
| Workshop Precaution | Replace Teflon combustion seal ring using cone expansion tool before inserting into boxer cylinder head |
Uyumlu Yüksek Basınç Pompası (Yakıt Devresi Grubu)
Aynı yüksek basınçlı Common Rail devresinde çalışır. Düşük basınç (P0087) teşhisinde enjektörleri değiştirmeden önce pompa debisini kontrol edin.
Montaj İpuçları
- [
- {
- "step": 1,
- "title": "Depressurize Direct Injection System & Remove Strut Braces",
- "instruction": "Depressurize direct injection circuit via fuel pump fuse pull and crank engine. Unbolt engine bay cross-strut braces to access boxer cylinder heads."
- },
- {
- "step": 2,
- "title": "Unplug Injector Harness & Disconnect Fuel Rail Lines",
- "instruction": "Disconnect direct injection harness connectors. Loosen steel fuel rail flare nuts (32 N·m) and unbolt fuel rail mounting bolts (19 N·m)."
- },
- {
- "step": 3,
- "title": "Extract Injectors & Install New Teflon Combustion Rings",
- "instruction": "Carefully remove injectors with puller tool. Expand replacement Teflon combustion seals onto nozzle tip and compress with sizing die."
- },
- {
- "step": 4,
- "title": "Seat Injectors, Torque Rail Fasteners & Verify Sealing",
- "instruction": "Push injectors into cylinder head ports. Torque rail bolts to 19 N·m. Tighten steel fuel line flare nut to 32 N·m. Check for fuel leaks on initial startup."
- }
- ]
Ariza Kodlari (DTC) ve Teshis Protokolleri
Bu common rail enjektorunde asinma, devre arizasi veya kalibrasyon kaymasi olustugunda tetiklenen yaygin ariza kodlari (DTC):
Fuel Rail / System Pressure Too Low
Excessive internal backleak from worn control valve seats drops common rail pressure below target under engine load.
Injector Circuit Malfunction / Open Circuit
Solenoid coil resistance drift (0.2-0.5 Ω) or piezo stack degradation triggers driver stage shutdown on affected cylinders.
Cylinder Misfire & Balancing Deviation
Carbon-clogged nozzle spray holes or missing IMA calibration causes uneven cylinder contribution. Recode ECM and verify washer seating.
Fuel Rail / System Pressure Too High
Spill line backpressure or stuck metering valve prevents rail depressurization, creating overpressure risks under load.
Teknik Arıza Teşhis ve Servis Protokolleri
Bu parça grubu için doğrulanmış atölye prosedürleri, test eşik değerleri ve servis talimatları.