16600-1LA0A
HITACHI 16600-1LA0A Iniettore Diretto Infiniti Q50 3.0T QX80 5.6L V8
16600-EY00A, 16600-1LA0B, FIJ0039High-Response Multi-Hole Electromagnetic High-Pressure Nozzle-150 barApplicazioni Veicolo e Motore
Specifiche Tecniche
| Specifica | Valore |
|---|---|
| Tipo di sistema | Nissan Direct Injection Gasoline (DIG) 150-bar System |
| Pressione di esercizioSpecifica Chiave | |
| Spray Configuration | High-Pressure Laser Multi-Hole Symmetrical Spray Pattern |
| INJECTOR HOLD-DOWN BOLT TORQUE | 10 N·m (89 in-lb) fuel rail mounting bolts📐 Calcolatore Coppia e Angolo → |
| FUEL LINE NUT TORQUE | 28 N·m (21 lb-ft) high-pressure delivery pipe flare nut |
| Combustion Seal | High-Density Virgin PTFE Combustion Ring |
| Upper Rail Sealing | Fluorocarbon (FKM) High-Temp Viton O-Ring |
| Manufacturer | Hitachi Astemo (Tier-1 OEM for Nissan Motor Co.) |
| OEM Production Number | 16600-1LA0A / FIJ0039 |
Pompa alta pressione abbinata (Gruppo circuito carburante)
Funziona sullo stesso circuito ad alta pressione Common Rail. In caso di bassa pressione rail (P0087), verificare la portata della pompa prima di sostituire gli iniettori.
Istruzioni di montaggio
- Never lubricate the lower PTFE combustion seal: Oil degrades the Teflon seal, causing high-pressure combustion blow-by and melted injector bodies.
- Inspect spark plugs on corresponding cylinders: A dripping injector washes fuel down the cylinder, fouling the plug and triggering misfire codes even after injector replacement.
- Verify low-pressure feed pressure: Ensure the tank lift pump delivers stable 5.0 to 6.5 bar (72 to 94 psi) before diagnosing high-pressure injector issues.
- Never reuse high-pressure crossover lines: Metallic flare ends yield upon tightening; reusing them causes dangerous high-pressure fuel sprays onto exhaust manifolds.
Codici Guasto (DTC) e Protocolli Diagnostici
Codici guasto diagnostici (DTC) comuni generati quando questo iniettore common rail presenta usura, problemi ai circuiti o scostamenti:
Fuel Rail / System Pressure Too Low
Excessive internal backleak from worn control valve seats drops common rail pressure below target under engine load.
Injector Circuit Malfunction / Open Circuit
Solenoid coil resistance drift (0.2-0.5 Ω) or piezo stack degradation triggers driver stage shutdown on affected cylinders.
Cylinder Misfire & Balancing Deviation
Carbon-clogged nozzle spray holes or missing IMA calibration causes uneven cylinder contribution. Recode ECM and verify washer seating.
Fuel Rail / System Pressure Too High
Spill line backpressure or stuck metering valve prevents rail depressurization, creating overpressure risks under load.
Protocolli Tecnici di Diagnosi & Assistenza
Procedure d'officina verificate, valori soglia di test e linee guida operative per questo assieme.