FAW Dalian CA4DC / CA4DC2 (3.2L CRDi) Diesel Injector
Cross-Reference & Technical Specs
Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the FAW Dalian CA4DC diesel engine family.
All Verified Part Numbers for FAW Dalian CA4DC / CA4DC2 (3.2L CRDi)
The following 2 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.
F00VC01358Nozzle Code: DLLA155P2175F00VC01358Nozzle Code: DLLA155P1674| Part Number (SKU) | Primary OE Reference | Control Valve | Nozzle Code |
|---|---|---|---|
| 1112010-55D | F00VC01358 | DLLA155P2175 | |
| 1112010-55D | F00VC01358 | DLLA155P1674 |
Verified Vehicle Compatibility
| Make / Manufacturer | Vehicle Model & Platform | Engine Specification | Model Years |
|---|---|---|---|
| FAW | CA4DC light commercial trucks / pickup trucks | FAW Dalian CA4DC / CA4DC2 (3.2L CRDi) | 2010s-present |
| BAW | BAW light commercial vehicles (CA4DC platforms) | FAW Dalian CA4DC / CA4DC2 (3.2L CRDi) | 2010s-present |
| FAW | Jiefang Light Truck CA1041 / Tiger V 3.2D | FAW Dalian CA4DC / CA4DC2 (3.2L CRDi) | 2007-2014 |
| BAW | Fenix BJ1044 / BJ1065 3.2D | FAW Dalian CA4DC / CA4DC2 (3.2L CRDi) | 2008-2013 |
Installation, Tightening Torque & Re-torque Protocol
Strict torque compliance is mandatory on FAW Dalian CA4DC / CA4DC2 (3.2L CRDi) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:
- Hold-down clamp bolt: 18 N·m + 60° (cold state). Always clean the cylinder head recess with an injector seat reamer.
- High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
- Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
After fitting replacement injectors on FAW Dalian CA4DC / CA4DC2 (3.2L CRDi), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.
Technical Diagnostics FAQ for FAW Dalian CA4DC / CA4DC2 (3.2L CRDi)
What DTC fault codes indicate a failing injector on FAW Dalian CA4DC / CA4DC2 (3.2L CRDi)?
The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.
Can sister SKUs within the FAW Dalian CA4DC / CA4DC2 (3.2L CRDi) family be interchanged?
Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and F00VC01358 control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.
Which specific Bosch injectors fit the FAW Dalian CA4DC / CA4DC2 (3.2L CRDi) engine?
The verified genuine Bosch common-rail injectors engineered for the FAW Dalian CA4DC / CA4DC2 (3.2L CRDi) engine family are:
- Bosch 0445110386 Common Rail Injector → (OE: 1112010-55D) — Control Valve: F00VC01358, Nozzle Code: DLLA155P2175
- Bosch 0445110291 Common Rail Injector → (OE: 1112010-55D) — Control Valve: F00VC01358, Nozzle Code: DLLA155P1674