Industrial Common Rail Fuel Injection Command Hub
Direct factory-calibrated diesel injector assemblies, OEM cross-reference intelligence, and workshop diagnostic data for European automotive platforms.
Parts Catalog
Filter 507 verified common rail injectors by Make, Emission standard, Rail pressure, and Control valve code.
Open Catalog Hub →Cross-Reference Tool
Reverse-lookup factory part numbers, sister Bosch SKUs, and internal control valve / nozzle codes across 507 verified assemblies.
Launch Cross-Reference →Vehicle Fitment Finder
Browse compatibility matrices across 100+ European passenger and LCV platforms. Filter by Make, Model, and Engine code.
Browse by Vehicle Platform →Workshop Technical & Diagnostic Guides
Comprehensive engineering documentation for common rail diagnostics, tightening procedures, and part verification.
OBD-II P-Code Fault Guide
P0201-P0208 single-cylinder circuit, P2146/P2149 group driver breakdown, and live backleak diagnosis.
Read Workshop Guide →WORKSHOP SOPTorque Specs & Printout Sheet
Hold-down bolt torque stages (15 N·m & 28-30 N·m), copper washer thickness grades, and printable workshop SOP.
Read Workshop Guide →INTERCHANGE RULESOE Cross-Reference Guide
Bosch 10-digit interchange architecture, superseded part mapping, and aftermarket valve code verification.
Read Workshop Guide →QUALITY ASSURANCEPart Verification & Inspection
Laser-etched QR / IMA code authentication, solenoid coil impedance testing, and dynamic backleak limit < 20 mL/min.
Read Workshop Guide →Workshop Diagnostic & Assembly Calculators
Instant browser-native calculators for common-rail hydraulic conversion, multi-cylinder return flow balance, IMA/IQA trim coding, copper shim selection, and TTY bolt torque-angle.
Pressure & Flow Converter
Convert Bar / MPa / PSI rail pressures and mm³/stroke ↔ mL/min delivery rates with ISO 4113 density.
Launch Calculator →RETURN FLOW TESTBack-Leak Balance Analyzer
Evaluate 3-8 cylinder flask volumes against Bosch, Delphi, Denso, and VDO leak-off thresholds.
Launch Calculator →ECU CALIBRATIONIMA / IQA Coding Validator
Verify character length, hex/base-32 syntax, and forbidden OEM characters before OBD programming.
Launch Calculator →HEAD GEOMETRYCopper Washer Calculator
Compute +0.50 / +1.00 mm flame-ring compensation after seat milling to preserve nozzle protrusion.
Launch Calculator →FASTENER MECHANICSClamp Bolt Torque-Angle
Convert N·m / lbf·ft and simulate M6-M10 stretch-bolt angular rotation (+90° / +180°) with axial stretch.
Launch Calculator →Popular European Diesel Vehicle Makes
8 Primary Manufacturers CoveredFeatured Verified Injector Assemblies
High-frequency European diesel injectors documented with test bench parameters, OE cross-references, and internal component codes.
0445110021
0445110036
0445110080
0445110137
Core Diesel Engine Families
Direct technical routing for high-volume common rail diesel powerplants across European passenger and commercial vehicle lines.
Database Standards & Verification Protocols
Engineered for commercial rebuilders, diesel calibration facilities, and international fleet maintenance networks.
ISO 4008 Test Standards
Delivery, backleak and spray-pattern limits are documented against the ISO 4008 bench-test framework, so every published figure carries a traceable test method.
IMA Calibration Protocol
Each assembly record states the IMA / trim code format the ECU expects, with the coding position and tolerance band described per injector family.
Cross-Reference Matrix
OEM numbers, sister Bosch SKUs and control-valve codes are mapped in a single matrix, so a superseded reference can be resolved without contacting us.
Independent & Open Access
Published independently of any single manufacturer or distributor. Reference data is free to read and open to correction by the workshops that use it.