BOSCH
07K906036G
Ver Especificações
SolenoidAudi Dual Injection (FSI Direct + MPI Multi-Point) SystemEuro 6330
BOSCH 07K906036G Injetor Alta Pressão Audi RS3 TT RS 2.5 TFSI EA855 EVO
Plataforma do motor:Audi 2.5L TFSI 5-Cylinder Turbo (EA855, EA855 EVO, DAZA, DNWA) →
REFERÊNCIA OE
07K906036C, 0261500407VÁLVULA DE CONTROLO
High-Flow High-Speed Solenoid ActuatorBICO INJETOR
-PRESSÃO DO RAIL
250 barEMISSÕESEuro 6d / Tier 3 Bin 30
GARANTIA12 Meses
03
Especificações Técnicas
| Especificação | Valor |
|---|---|
| Tipo de sistema | Bosch HDEV6 High-Performance Direct Gasoline Fuel Injector |
| Pressão de trabalhoEspec. Principal | |
| Spray Pattern | High-flow laser-calibrated spray pattern for high-boost 5-cylinder applications |
| Fuel Rail Bolt Torque | 10 N·m (holding bracket hex fasteners) |
| High Pressure Pipe Torque | 27 N·m Flare Nut Connection |
| Coil Resistance | 1.5 - 1.9 Ω at 20°C (High performance peak-and-hold drive) |
| Códigos de falha comuns | P0300 (Random Misfire), P0301-P0305 (5-Cylinder Misfire), P0172 (Fuel System Rich Bank 1) |
| Workshop Precaution | Mandatory Teflon combustion seal replacement and compression calibration prior to insertion |
04
Dicas de instalação
- [
- {
- "step": 1,
- "title": "Depressurize Fuel Rail & Remove Upper Charge Air Piping",
- "instruction": "Depressurize high pressure fuel injection system via VCDS/ODIS or fuse removal. Remove carbon intake charge pipes to access fuel rail."
- },
- {
- "step": 2,
- "title": "Disconnect Injector Harness & High Pressure Steel Rail Pipe",
- "instruction": "Unplug electrical connectors from the 5 injectors. Loosen the high pressure steel fuel rail line (27 N·m) and unbolt fuel rail mounting bolts (10 N·m)."
- },
- {
- "step": 3,
- "title": "Extract Injectors & Fit New Teflon Chamber Seals",
- "instruction": "Carefully remove injectors with puller tool T10133. Fit new Teflon combustion chamber seals using the installation cone and compression sleeve."
- },
- {
- "step": 4,
- "title": "Torque Rail Fasteners & Verify High Pressure Seal Integrity",
- "instruction": "Press injectors into cylinder head ports. Tighten rail bolts to 10 N·m. Torque steel high pressure line to 27 N·m. Prime fuel system and check for zero leaks."
- }
- ]
05
Codigos de Falha (DTC) e Protocolos de Diagnostico
Codigos de falha diagnosticos (DTC) comuns acionados quando este injetor common rail apresenta desgaste, falhas de circuito ou desvio:
P0087Critical
Fuel Rail / System Pressure Too Low
Excessive internal backleak from worn control valve seats drops common rail pressure below target under engine load.
P0201 - P0208High
Injector Circuit Malfunction / Open Circuit
Solenoid coil resistance drift (0.2-0.5 Ω) or piezo stack degradation triggers driver stage shutdown on affected cylinders.
P0300 / P0301+High
Cylinder Misfire & Balancing Deviation
Carbon-clogged nozzle spray holes or missing IMA calibration causes uneven cylinder contribution. Recode ECM and verify washer seating.
P0088High
Fuel Rail / System Pressure Too High
Spill line backpressure or stuck metering valve prevents rail depressurization, creating overpressure risks under load.
PROTOCOLOS DE OFICINA
Protocolos Técnicos de Diagnóstico & Manutenção
Procedimentos de oficina verificados, valores limite de teste e normas de serviço para este conjunto.
Protocolo de Diagnóstico de Oficina
Ler protocolo técnicoTeste de Retorno de Injetores Common Rail: Valores e Limites
IMA / QR Calibration
Ler protocolo técnicoCodificação Injetor Bosch IMA: Posição e Guia 6-9 Dígitos
SOP DE OFICINA DIESEL COMMON RAIL
Ler protocolo técnicoRemoção de Injetor Preso e Descarbonização | Guia SOP
PROTOCOLO DE MONTAGEM E INSTALAÇÃO
Ler protocolo técnico