ENGINE FAMILY SPECIFICATIONBOSCH COMMON RAILEuro 5 / Euro 6

Ford 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416) Diesel Injector
Cross-Reference & Technical Specs

Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the Ford 1.5L diesel engine family.

Primary OEMBOSCH
Control ValveF00VC01372
Nozzle CodeDLLA155P2307
Peak Pressure1600 bar
Hold-Down Torque28 N·m
01

All Verified Part Numbers for Ford 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)

The following 2 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.

Part Number (SKU)Primary OE ReferenceControl ValveNozzle Code
1745052, 1870361, 2038753F00VC01372DLLA155P2307
1745052, 2135294, CV6Q-9F593-AAF00VC01372DLLA155P2307
02

Verified Vehicle Compatibility

Make / ManufacturerVehicle Model & PlatformEngine SpecificationModel Years
FordFiesta VI / VII 1.5 TDCiFord 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)2012-2020
FordFocus III 1.5 TDCiFord 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)2014-2018
FordB-Max / C-Max II 1.5 TDCiFord 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)2012-2019
FordMondeo V 1.5 TDCiFord 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)2015-2020
FordEcoSport 1.5 TDCiFord 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)2013-2020
FordTransit Courier / Tourneo Connect 1.5 TDCiFord 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)2014-2020
FordB-Max 1.5 TDCi / 1.6 TDCiFord 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)2012-2017
FordC-Max II / Grand C-Max 1.5 TDCi / 1.6 TDCiFord 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)2012-2019
FordFiesta VI / VII 1.5 TDCi / 1.6 TDCiFord 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)2012-2020
FordFocus III 1.5 TDCi / 1.6 TDCiFord 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)2012-2018
FordMondeo V 1.5 TDCi / 1.6 TDCiFord 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)2014-2019
FordTransit Connect / Tourneo Connect 1.5 TDCi / 1.6 TDCiFord 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)2013-2020
03

Installation, Tightening Torque & Re-torque Protocol

Strict torque compliance is mandatory on Ford 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:

🔧 Recommended Assembly Torques:
  • Hold-down clamp bolt: 28 N·m (cold state). Always clean the cylinder head recess with an injector seat reamer.
  • High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
  • Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
⚠️ ECU IMA Coding Requirement:

After fitting replacement injectors on Ford 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.

04

Technical Diagnostics FAQ for Ford 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)

What DTC fault codes indicate a failing injector on Ford 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416)?

The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.

Can sister SKUs within the Ford 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416) family be interchanged?

Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and F00VC01372 control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.

Which specific Bosch injectors fit the Ford 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416) engine?

The verified genuine Bosch common-rail injectors engineered for the Ford 1.5L / 1.6L Duratorq TDCi / EcoBlue (DLD-415 / DLD-416) engine family are: