ENGINE FAMILY SPECIFICATIONBOSCH COMMON RAILEuro 4

Renault / Dongfeng dCi 11 (11.1L Common Rail) Diesel Injector
Cross-Reference & Technical Specs

Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the Renault diesel engine family.

Primary OEMBOSCH
Control ValveF00RJ02472
Nozzle CodeDLLA150P2142
Peak Pressure1800 bar
Hold-Down Torque30-35 N·m
01

All Verified Part Numbers for Renault / Dongfeng dCi 11 (11.1L Common Rail)

The following 2 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.

Part Number (SKU)Primary OE ReferenceControl ValveNozzle Code
1112BF11-010, 5268408F00RJ02472DLLA150P2142
5010477874, 5010550956, 5001866647F00RJ00399DLLA150P1076
02

Verified Vehicle Compatibility

Make / ManufacturerVehicle Model & PlatformEngine SpecificationModel Years
DongfengTianlong KL / Tianlong 6x4 tractorDongfeng dCi 11 (11.1L)2010-2015
DongfengTianlong VL 8x4 dump truckDongfeng dCi 11 (11.1L)2011-2016
King LongXMQ6127 / XMQ6119 city busdCi 11 (11.1L)2012-2017
YutongZK6122HD / ZK6126D coachdCi 11 (11.1L)2011-2016
FotonAuman EST 6x4 tractordCi 11 (11.1L)2013-2018
DongfengTianlong KL special-purpose (concrete mixer, 8x4)Dongfeng dCi 11 (11.1L)2012-2017
RenaultPremium Distribution / Route / Lander 370 / 420Renault dCi 11 (11.1L)2000-2006
RenaultKerax 370 / 420 Heavy Construction TruckRenault dCi 11 (11.1L)2001-2006
DongfengTianlong Kinland DFL4251 Heavy Commercial TruckDongfeng dCi 11 (11.1L)2006-2016
IvecoEuroStar / EuroTech Heavy Commercial TruckdCi 11 (11.1L)2001-2006
03

Installation, Tightening Torque & Re-torque Protocol

Strict torque compliance is mandatory on Renault / Dongfeng dCi 11 (11.1L Common Rail) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:

🔧 Recommended Assembly Torques:
  • Hold-down clamp bolt: 30-35 N·m (cold state). Always clean the cylinder head recess with an injector seat reamer.
  • High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
  • Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
⚠️ ECU IMA Coding Requirement:

After fitting replacement injectors on Renault / Dongfeng dCi 11 (11.1L Common Rail), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.

04

Technical Diagnostics FAQ for Renault / Dongfeng dCi 11 (11.1L Common Rail)

What DTC fault codes indicate a failing injector on Renault / Dongfeng dCi 11 (11.1L Common Rail)?

The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.

Can sister SKUs within the Renault / Dongfeng dCi 11 (11.1L Common Rail) family be interchanged?

Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and F00RJ02472 control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.

Which specific Bosch injectors fit the Renault / Dongfeng dCi 11 (11.1L Common Rail) engine?

The verified genuine Bosch common-rail injectors engineered for the Renault / Dongfeng dCi 11 (11.1L Common Rail) engine family are: