ENGINE FAMILY SPECIFICATIONBOSCH COMMON RAILEuro 4

Toyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D) Diesel Injector
Cross-Reference & Technical Specs

Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the Toyota 1ND-TV (1.4 D-4D) diesel engine family.

Primary OEMBOSCH
Control ValveF00VC01340
Nozzle CodeDSLA150P1438
Peak Pressure1600 bar
Hold-Down Torque20 N·m
01

All Verified Part Numbers for Toyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D)

The following 3 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.

Part Number (SKU)Primary OE ReferenceControl ValveNozzle Code
23670-33040, 23670-33042, 23670-0N020F00VC01340DSLA150P1438
13537791545, 7791545, 23670-33030F00VC01306DSLA150P1072
23670-0N020, 107750-0272F00VC01306DSLA150P1072
02

Verified Vehicle Compatibility

Make / ManufacturerVehicle Model & PlatformEngine SpecificationModel Years
ToyotaCorolla (E120 / E150) / Yaris (P90) / Auris (E150) 1.4 D-4DToyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D)2004-2009
MiniOne D (R50) 1.4 D (65kW / 88hp)Toyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D)2005-2006
MiniOne D (R50) 1.4 D HatchbackToyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D)2003-2006
ToyotaYaris (P10) / Corolla (E120) 1.4 D-4DToyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D)2002-2006
ToyotaYaris 1.4 D-4D (NLP10)Toyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D)2001-2005
ToyotaYaris Verso 1.4 D-4D (NLP20 / NLP22)Toyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D)2001-2005
03

Installation, Tightening Torque & Re-torque Protocol

Strict torque compliance is mandatory on Toyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:

🔧 Recommended Assembly Torques:
  • Hold-down clamp bolt: 20 N·m (cold state). Always clean the cylinder head recess with an injector seat reamer.
  • High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
  • Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
⚠️ ECU IMA Coding Requirement:

After fitting replacement injectors on Toyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.

04

Technical Diagnostics FAQ for Toyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D)

What DTC fault codes indicate a failing injector on Toyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D)?

The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.

Can sister SKUs within the Toyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D) family be interchanged?

Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and F00VC01340 control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.

Which specific Bosch injectors fit the Toyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D) engine?

The verified genuine Bosch common-rail injectors engineered for the Toyota 1ND-TV (1.4 D-4D) & MINI W17 D14 (1.4 D) engine family are: