23100-25010
DENSO 23100-25010 Bomba Alta Presión Toyota Camry RAV4 2.5L D-4S
23100-F0010, GDP512Integrated High-Speed Digital Flow Control Solenoid-200 barAplicaciones de vehículos y motores
| Vehículo | Motor | Años |
|---|---|---|
| Toyota Camry (XV70) | Toyota / Lexus 2.0L & 2.5L Dynamic Force D-4S (A25A-FKS / A25A-FXS / M20A-FKS) | 2018-2024 |
| Toyota RAV4 (XA50) | Toyota / Lexus 2.0L & 2.5L Dynamic Force D-4S (A25A-FKS / A25A-FXS / M20A-FKS) | 2019-2024 |
| Lexus ES 250 | Toyota / Lexus 2.0L & 2.5L Dynamic Force D-4S (A25A-FKS / A25A-FXS / M20A-FKS) | 2021-2024 |
Especificaciones técnicas
| Especificación | Valor |
|---|---|
| Tipo de sistema | Toyota D-4S Dual Injection (Direct & Port) 200-bar System |
| Presión de servicioDato clave | |
| Pump Mechanism | Camshaft Driven Single-Piston Plunger Mechanical Pump |
| Mounting Flange Bolt Torque | 21 N·m (15 lb-ft) flange bolts |
| FUEL LINE NUT TORQUE | 30 N·m (22 lb-ft) high-pressure fuel pipe union nut |
| Drive Interface | Roller Lifter Tappet with Hardened Contact Face |
| Flow Control Solenoid | Integrated High-Speed Pulse-Width Modulated Solenoid Actuator |
| Manufacturer | Denso (Tier-1 OEM for Toyota Motor Corporation) |
| Denso Production Reference | 23100-25010 / GDP512 |
Bomba de alta presión compatible (Ensamblaje del circuito de combustible)
Funciona en el mismo circuito de alta presión Common Rail. Al diagnosticar baja presión (P0087), verifique el caudal de la bomba antes de sustituir los inyectores.
Consejos de instalación
- Never reuse high-pressure fuel pipes: Toyota mandates replacement of steel fuel delivery pipes whenever loosened to prevent fuel spray hazards.
- Inspect roller lifter bucket: A scored or worn roller tappet damages the camshaft drive lobe, necessitating expensive camshaft replacement.
- Verify engine oil for fuel dilution: A failing internal pump seal weeps fuel into the timing cover, causing oil level rise and bearing wear.
- Prime fuel circuit prior to cranking: Turn ignition ON for 5 seconds 3 times to prime low-pressure feed and purge air pockets.
Codigos de Falla (DTC) y Protocolos de Diagnostico
Codigos de falla de diagnostico (DTC) comunes que se activan cuando este inyector common rail experimenta desgaste, fallas de circuito o desbalance:
Fuel Rail / System Pressure Too Low
Excessive internal backleak from worn control valve seats drops common rail pressure below target under engine load.
Injector Circuit Malfunction / Open Circuit
Solenoid coil resistance drift (0.2-0.5 Ω) or piezo stack degradation triggers driver stage shutdown on affected cylinders.
Cylinder Misfire & Balancing Deviation
Carbon-clogged nozzle spray holes or missing IMA calibration causes uneven cylinder contribution. Recode ECM and verify washer seating.
Fuel Rail / System Pressure Too High
Spill line backpressure or stuck metering valve prevents rail depressurization, creating overpressure risks under load.
Protocolos Técnicos de Diagnóstico y Servicio
Procedimientos de taller verificados, umbrales de prueba y pautas de servicio para este conjunto.