04E906036Q
BOSCH 04E906036Q Inyector Alta Presión VW Golf 7 Jetta Audi A3 EA211 1.4 TSI
04E906036AF, 04E906036T, 0261500354, 0261500355Electromagnetic high-pressure solenoid needle valve-200 barAplicaciones de vehículos y motores
| Vehículo | Motor | Años |
|---|---|---|
| Volkswagen Golf VII 1.4 TSI | Volkswagen / Audi EA211 1.4L & 1.5L TSI / TFSI (CZDA / CZEA / CHPA / DADA) | 2012-2020 |
| Audi A3 8V 1.4 TFSI | Volkswagen / Audi EA211 1.4L & 1.5L TSI / TFSI (CZDA / CZEA / CHPA / DADA) | 2013-2020 |
| Volkswagen Jetta 1.4 TSI | Volkswagen / Audi EA211 1.4L & 1.5L TSI / TFSI (CZDA / CZEA / CHPA / DADA) | 2014-2022 |
Especificaciones técnicas
| Especificación | Valor |
|---|---|
| Tipo de sistema | Bosch HDEV5 Direct Injection Multi-Hole Gasoline Injector |
| Presión de servicioDato clave | |
| Spray Pattern | Laser-drilled multi-hole asymmetrical optimized direct spray |
| Hold-down Torque | 9 N·m Fuel Rail Clamping Bolts📐 Asistente de par y ángulo → |
| High Pressure Feed Line Torque | 27 N·m Flare Nut Connection |
| Coil Resistance | 1.5 - 2.0 Ω at 20°C (Direct peak-and-hold circuit) |
| Códigos de avería frecuentes | P0300 (Random Misfire), P0301-P0304 (Cylinder Misfire), P0171 (System Too Lean) |
| Workshop Precaution | Always install new Teflon combustion seal ring using VAG T10133 tool cones before reinstallation |
Bomba de alta presión compatible (Ensamblaje del circuito de combustible)
Funciona en el mismo circuito de alta presión Common Rail. Al diagnosticar baja presión (P0087), verifique el caudal de la bomba antes de sustituir los inyectores.
Consejos de instalación
- [
- {
- "step": 1,
- "title": "Depressurize Fuel Rail & Remove Airbox Assembly",
- "instruction": "Depressurize high-pressure fuel rail. Disconnect air cleaner housing, charge air pipes, and wiring harness connectors."
- },
- {
- "step": 2,
- "title": "Remove High Pressure Rail Fasteners",
- "instruction": "Remove fuel rail clamping screws (9 N·m). Pull the fuel rail assembly straight back to extract injectors from the cylinder head."
- },
- {
- "step": 3,
- "title": "Fit New Teflon Combustion Chamber Ring",
- "instruction": "Slide new Teflon seal over T10133 installation cone. Compress the seal with calibration sleeve T10133/3 until it fits tightly in groove."
- },
- {
- "step": 4,
- "title": "Torque Rail Screws & Steel Fuel Line",
- "instruction": "Push injectors into ports. Evenly tighten rail bolts to 9 N·m. Tighten high pressure pipe flare nut to 27 N·m."
- }
- ]
Codigos de Falla (DTC) y Protocolos de Diagnostico
Codigos de falla de diagnostico (DTC) comunes que se activan cuando este inyector common rail experimenta desgaste, fallas de circuito o desbalance:
Fuel Rail / System Pressure Too Low
Excessive internal backleak from worn control valve seats drops common rail pressure below target under engine load.
Injector Circuit Malfunction / Open Circuit
Solenoid coil resistance drift (0.2-0.5 Ω) or piezo stack degradation triggers driver stage shutdown on affected cylinders.
Cylinder Misfire & Balancing Deviation
Carbon-clogged nozzle spray holes or missing IMA calibration causes uneven cylinder contribution. Recode ECM and verify washer seating.
Fuel Rail / System Pressure Too High
Spill line backpressure or stuck metering valve prevents rail depressurization, creating overpressure risks under load.
Protocolos Técnicos de Diagnóstico y Servicio
Procedimientos de taller verificados, umbrales de prueba y pautas de servicio para este conjunto.