Ford 2.7L & 3.0L V6 EcoBoost Nano Twin-Turbo Diesel Injector
Cross-Reference & Technical Specs
Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the Ford 2.7L diesel engine family.
All Verified Part Numbers for Ford 2.7L & 3.0L V6 EcoBoost Nano Twin-Turbo
The following 2 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.
See Product DetailNozzle Code: See Product DetailSee Product DetailNozzle Code: See Product Detail| Part Number (SKU) | Primary OE Reference | Control Valve | Nozzle Code |
|---|---|---|---|
| FT4E-9D376-AA, GDP1009, HM10045 | See Product Detail | See Product Detail | |
| 0261500298, CM5248, FJ1234 | See Product Detail | See Product Detail |
Verified Vehicle Compatibility
Installation, Tightening Torque & Re-torque Protocol
Strict torque compliance is mandatory on Ford 2.7L & 3.0L V6 EcoBoost Nano Twin-Turbo common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:
- Hold-down clamp bolt: 10 N·m (cold state). Always clean the cylinder head recess with an injector seat reamer.
- High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
- Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
After fitting replacement injectors on Ford 2.7L & 3.0L V6 EcoBoost Nano Twin-Turbo, generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.
Technical Diagnostics FAQ for Ford 2.7L & 3.0L V6 EcoBoost Nano Twin-Turbo
What DTC fault codes indicate a failing injector on Ford 2.7L & 3.0L V6 EcoBoost Nano Twin-Turbo?
The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.
Can sister SKUs within the Ford 2.7L & 3.0L V6 EcoBoost Nano Twin-Turbo family be interchanged?
Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and See Product Detail control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.
Which specific Bosch injectors fit the Ford 2.7L & 3.0L V6 EcoBoost Nano Twin-Turbo engine?
The verified genuine Bosch common-rail injectors engineered for the Ford 2.7L & 3.0L V6 EcoBoost Nano Twin-Turbo engine family are:
- Bosch FT4Z-9350-A Common Rail Injector → (OE: FT4E-9D376-AA, GDP1009, HM10045, HPP0027, 217-3452) —
- Bosch FT4Z-9F593-A Common Rail Injector → (OE: 0261500298, CM5248, FJ1234) —