Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) Diesel Injector
Cross-Reference & Technical Specs
Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the Iveco / FPT Sofim F1AE / F1CE diesel engine family.
All Verified Part Numbers for Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet)
The following 2 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.
F00VC01338Nozzle Code: DLLA142P1595F00VC01201Nozzle Code: DLLA139P2229| Part Number (SKU) | Primary OE Reference | Control Valve | Nozzle Code |
|---|---|---|---|
| 504088755, 504377671 | F00VC01338 | DLLA142P1595 | |
| 504389548, 5801594342, 5801483286 | F00VC01201 | DLLA139P2229 |
Verified Vehicle Compatibility
| Make / Manufacturer | Vehicle Model & Platform | Engine Specification | Model Years |
|---|---|---|---|
| Fiat | Ducato 2.3 D Multijet (100/120/130 Multijet) | Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) | 2006-2014 |
| Fiat | Doblo 1.9 JTD / 2.3 Multijet | Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) | 2004-2010 |
| Iveco | Daily III/IV 2.3 D (35S / 50C / 65C variants) | Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) | 2006-2014 |
| Iveco | Daily V / VI 2.3 D | Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) | 2014-2022 |
| UAZ | Patriot 2.3 D | Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) | 2009-2016 |
| New Holland | Tractor T5000 / T6000 series 2.3 D | Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) | 2006-2014 |
| Iveco | Daily IV / V / VI 29L / 35C / 35S / 50C / 65C 2.3 D & 3.0 D | Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) | 2011-2016 |
| Fiat | Ducato (250) 150 / 180 Multijet 3.0 D | Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) | 2011-2016 |
| Peugeot | Boxer 3.0 HDi 145 / 175 Euro 5 | Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) | 2011-2016 |
| Citroen | Jumper 3.0 HDi 145 / 180 Euro 5 | Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) | 2011-2016 |
Installation, Tightening Torque & Re-torque Protocol
Strict torque compliance is mandatory on Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:
- Hold-down clamp bolt: 18 N·m + 60° (cold state). Always clean the cylinder head recess with an injector seat reamer.
- High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
- Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
After fitting replacement injectors on Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.
Technical Diagnostics FAQ for Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet)
What DTC fault codes indicate a failing injector on Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet)?
The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.
Can sister SKUs within the Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) family be interchanged?
Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and F00VC01338 control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.
Which specific Bosch injectors fit the Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) engine?
The verified genuine Bosch common-rail injectors engineered for the Iveco / FPT Sofim F1AE / F1CE (2.3L & 3.0L JTD / HDi / MultiJet) engine family are:
- Bosch 0445110273 Common Rail Injector → (OE: 504088755, 504377671) — Control Valve: F00VC01338, Nozzle Code: DLLA142P1595
- Bosch 0445110418 Common Rail Injector → (OE: 504389548, 5801594342, 5801483286, 500061268, 1609097280) — Control Valve: F00VC01201, Nozzle Code: DLLA139P2229