Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) Diesel Injector
Cross-Reference & Technical Specs
Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the Kubota V3307 diesel engine family.
All Verified Part Numbers for Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4)
The following 3 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.
PlateNozzle Code: G3S66PlateNozzle Code: G3S33PlateNozzle Code: DLLA148P985| Part Number (SKU) | Primary OE Reference | Control Valve | Nozzle Code |
|---|---|---|---|
| 1J770-53051, 1J770-53050, 1J770-53052 | Plate | G3S66 | |
| 1J770-53050, 1J770-53051, 1J770-53070 | Plate | G3S33 | |
| 1J770-53050, 1J770-53051, 1J770-53070 | Plate | DLLA148P985 |
Verified Vehicle Compatibility
| Make / Manufacturer | Vehicle Model & Platform | Engine Specification | Model Years |
|---|---|---|---|
| Kubota | KX080-3T / KX080-4 Compact Excavator | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2011-2022 |
| Kubota | SVL75 / SVL75-2 Compact Track Loader | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2012-2022 |
| Kubota | SSV75 Skid Steer Loader | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2015-2023 |
| Kubota | M6060 / M7060 Utility Tractor | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2012-2022 |
| Kubota | M8560 / M9960 Ag Tractor | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2012-2021 |
| Bobcat | T590 / T595 Compact Track Loader | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2012-2020 |
| Bobcat | S590 / S595 Skid Steer Loader | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2012-2020 |
| Bobcat | T630 / T650 Compact Track Loader | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2013-2020 |
| Kubota | M-Series Agricultural Tractors (M6040 to M8560) | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2010-2022 |
| Kubota | SVL Track Loaders & KX080 Excavators | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2011-2022 |
| Bobcat | S-Series & T-Series Loaders (S185, T190, S630, T650) | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2011-2018 |
| Kubota | M-Series Tractors (M6040 to M9540, M6060, M7060) | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2012-2022 |
| Kubota | Compact Track Loaders (SVL75, SVL75-2) | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2012-2022 |
| Bobcat | Skid-Steer Loaders (S750, S770, S850) | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2013-2020 |
| Bobcat | Compact Track Loaders (T750, T770, T870) | Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) | 2013-2020 |
Installation, Tightening Torque & Re-torque Protocol
Strict torque compliance is mandatory on Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:
- Hold-down clamp bolt: 25 N·m (cold state). Always clean the cylinder head recess with an injector seat reamer.
- High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
- Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
After fitting replacement injectors on Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.
Technical Diagnostics FAQ for Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4)
What DTC fault codes indicate a failing injector on Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4)?
The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.
Can sister SKUs within the Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) family be interchanged?
Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and Plate control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.
Which specific Bosch injectors fit the Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) engine?
The verified genuine Bosch common-rail injectors engineered for the Kubota V3307 / V3800 (3.3L & 3.8L CR-TE4) engine family are:
- Bosch 095000-8480 Common Rail Injector → (OE: 1J770-53051, 1J770-53050, 1J770-53052, 1J770-53053, 295050-1980, 295050-0120) — Control Valve: Plate, Nozzle Code: G3S66
- Bosch 095000-8900 Common Rail Injector → (OE: 1J770-53050, 1J770-53051, 1J770-53070, 1J770-53052, 095000-8901, 095000-8902, 095000-8903, DCRI108900) — Control Valve: Plate, Nozzle Code: G3S33
- Bosch 095000-9770 Common Rail Injector → (OE: 1J770-53050, 1J770-53051, 1J770-53070, 1J770-53071, 1J770-53072, 1J770-53074, 7000767, 7256789) — Control Valve: Plate, Nozzle Code: DLLA148P985