PSA DV6 / DV6TED4 (1.6 HDi / 1.6 TDCi 9HX / 9HZ / 9HY) Diesel Injector
Cross-Reference & Technical Specs
Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the PSA DV6 / DV6TED4 diesel engine family.
All Verified Part Numbers for PSA DV6 / DV6TED4 (1.6 HDi / 1.6 TDCi 9HX / 9HZ / 9HY)
The following 1 common-rail injector assembly is calibrated for this engine family. Click the SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.
Bosch 0445110311 Common Rail Injector for PSA DV6 / DV6TED4 (1.6 HDi / 1.6 TDCi 9HX / 9HZ / 9HY) →
BOSCH CRIF00VC01364Nozzle Code: DLLA149P1471| Part Number (SKU) | Primary OE Reference | Control Valve | Nozzle Code |
|---|---|---|---|
| 1980L1, 1980CQ, 1609849980 | F00VC01364 | DLLA149P1471 |
Verified Vehicle Compatibility
Installation, Tightening Torque & Re-torque Protocol
Strict torque compliance is mandatory on PSA DV6 / DV6TED4 (1.6 HDi / 1.6 TDCi 9HX / 9HZ / 9HY) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:
- Hold-down clamp bolt: 4 N·m + 65° (cold state). Always clean the cylinder head recess with an injector seat reamer.
- High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
- Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
After fitting replacement injectors on PSA DV6 / DV6TED4 (1.6 HDi / 1.6 TDCi 9HX / 9HZ / 9HY), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.
Technical Diagnostics FAQ for PSA DV6 / DV6TED4 (1.6 HDi / 1.6 TDCi 9HX / 9HZ / 9HY)
What DTC fault codes indicate a failing injector on PSA DV6 / DV6TED4 (1.6 HDi / 1.6 TDCi 9HX / 9HZ / 9HY)?
The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.
Can sister SKUs within the PSA DV6 / DV6TED4 (1.6 HDi / 1.6 TDCi 9HX / 9HZ / 9HY) family be interchanged?
Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and F00VC01364 control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.
Which specific Bosch injectors fit the PSA DV6 / DV6TED4 (1.6 HDi / 1.6 TDCi 9HX / 9HZ / 9HY) engine?
The verified genuine Bosch common-rail injectors engineered for the PSA DV6 / DV6TED4 (1.6 HDi / 1.6 TDCi 9HX / 9HZ / 9HY) engine family are:
- Bosch 0445110311 Common Rail Injector → (OE: 1980L1, 1980CQ, 1609849980, 1609850080, 9662003380) — Control Valve: F00VC01364, Nozzle Code: DLLA149P1471