06H906036Q

1. [
2. {
3. "step": 1,
4. "title": "Remove Intake Manifold & Relieve Fuel Pressure",
5. "instruction": "Depressurize fuel system. Disconnect battery. Remove upper intake manifold assembly to expose high-pressure fuel rail and direct injectors."
6. },
7. {
8. "step": 2,
9. "title": "Use T10133 Slide Hammer Tool to Extract Injectors",
10. "instruction": "Install factory extraction puller tool T10133 onto injector grooved collar. Slide hammer straight outward along injector bore axis to prevent damage to head pocket."
11. },
12. {
13. "step": 3,
14. "title": "Clean Cylinder Head Injector Bores Thoroughly",
15. "instruction": "Use brass bore brush tool to ream carbon debris from injector combustion tip seat pockets in cylinder head. Blow out clean with compressed air."
16. },
17. {
18. "step": 4,
19. "title": "Install New Teflon Combustion Seal with Calibration Cone",
20. "instruction": "Slide brand-new Teflon seal ring over expanding cone tool. Size into final groove using calibration sleeve T10133/2 until diameter shrinks to factory spec."
21. },
22. {
23. "step": 5,
24. "title": "Assemble Fuel Rail & Torque Fasteners",
25. "instruction": "Push injectors into fuel rail with support clips. Align tips into cylinder head. Tighten fuel rail mounting bolts to 9 N\u00b7m and high pressure steel line to 27 N\u00b7m."
26. }
27. ]

Coduri comune de eroare de diagnosticare (DTC) declansate atunci cand acest injector common rail sufera uzura, defectiuni de circuit sau abateri: