Cummins ISX15 / X15 (14.9L / 15.0L) Diesel Injector
Cross-Reference & Technical Specs
Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the Cummins ISX15 / X15 diesel engine family.
All Verified Part Numbers for Cummins ISX15 / X15 (14.9L / 15.0L)
The following 1 common-rail injector assembly is calibrated for this engine family. Click the SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.
Integrated XPI ValveNozzle Code: XPI Multi-Hole| Part Number (SKU) | Primary OE Reference | Control Valve | Nozzle Code |
|---|---|---|---|
| 4307475RX, 2872405, 2897320 | Integrated XPI Valve | XPI Multi-Hole |
Verified Vehicle Compatibility
| Make / Manufacturer | Vehicle Model & Platform | Engine Specification | Model Years |
|---|---|---|---|
| Kenworth | T680 / T800 / T880 / W900 | Cummins ISX15 / X15 (14.9L / 15.0L) | 2010-2024 |
| Peterbilt | 389 / 579 / 587 / 567 | Cummins ISX15 / X15 (14.9L / 15.0L) | 2010-2024 |
| Freightliner | Cascadia / Coronado / Columbia | Cummins ISX15 / X15 (14.9L / 15.0L) | 2010-2018 |
| International | ProStar / LoneStar / LT625 / HX520 | Cummins ISX15 / X15 (14.9L / 15.0L) | 2010-2024 |
| Volvo | VNL 670 / 780 | Cummins ISX15 / X15 (14.9L / 15.0L) | 2010-2017 |
| Western Star | 4900EX / 4900FA / 5700XE | Cummins ISX15 / X15 (14.9L / 15.0L) | 2011-2023 |
Installation, Tightening Torque & Re-torque Protocol
Strict torque compliance is mandatory on Cummins ISX15 / X15 (14.9L / 15.0L) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:
- Hold-down clamp bolt: 20 N·m + 80 N·m (cold state). Always clean the cylinder head recess with an injector seat reamer.
- High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
- Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
After fitting replacement injectors on Cummins ISX15 / X15 (14.9L / 15.0L), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.
Technical Diagnostics FAQ for Cummins ISX15 / X15 (14.9L / 15.0L)
What DTC fault codes indicate a failing injector on Cummins ISX15 / X15 (14.9L / 15.0L)?
The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.
Can sister SKUs within the Cummins ISX15 / X15 (14.9L / 15.0L) family be interchanged?
Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and Integrated XPI Valve control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.
Which specific Bosch injectors fit the Cummins ISX15 / X15 (14.9L / 15.0L) engine?
The verified genuine Bosch common-rail injectors engineered for the Cummins ISX15 / X15 (14.9L / 15.0L) engine family are:
- Bosch 4307475 Common Rail Injector → (OE: 4307475RX, 2872405, 2897320, 4307012, 4307525, 5579417, 2894920) — Control Valve: Integrated XPI Valve, Nozzle Code: XPI Multi-Hole