ENGINE FAMILY SPECIFICATIONBOSCH COMMON RAILEuro 4

BMW M47 / M57 (2.0d / 3.0d M47N / M57N / 204D4 / 306D2) Diesel Injector
Cross-Reference & Technical Specs

Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the BMW M47 / M57 diesel engine family.

Primary OEMBOSCH
Control ValveF00VC01304
Nozzle CodeDLLA160P1063+
Peak Pressure1600 bar peak rail pressure
Hold-Down Torque9 N·m + 90°
01

All Verified Part Numbers for BMW M47 / M57 (2.0d / 3.0d M47N / M57N / 204D4 / 306D2)

The following 11 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.

Part Number (SKU)Primary OE ReferenceControl ValveNozzle Code
13537787234, 13537788609, 13537789670F00VC01304DLLA160P1063+
13537793836, 13537790093, 13537794334F00VC01331DLLA160P1308
13537789670, 13537787187, 13537787234F00VC01310DLLA160P1063+
13537808089, 13537808094, 13537797877INTEGRATED PIEZO ACTUATOR (CRI3)F00VX40021
13537789573, 13537785983, 13537785585F00VC01043DLLA145P1223
13537785573, 13537785984, 7785573F00VC01043DLLA145P926
13534701464, 13537785984, 13537785573F00VC01043DLLA145P926
STC4555, STC4555E, 13537785983F00VC01043DLLA145P928
13537785574, 13537785985, 7785574F00VC01043DLLA145P927
13537790117, 13537794435, 13537794555F00VC01331DLLA160P1384
13537749652, 13537791545, 13537794434F00VC01331DLLA162P1443
02

Verified Vehicle Compatibility

Make / ManufacturerVehicle Model & PlatformEngine SpecificationModel Years
BMW3 Series (E46)M47 / M57 / M47N / M57N / 204D4 / 306D22002-2007
BMW3 Series (E46/E90)M47 / M57 / M47N / M57N / 204D4 / 306D22002-2009
BMW5 Series (E60/E61)M47 / M57 / M47N / M57N / 204D4 / 306D22003-2010
BMW7 Series (E65)M47 / M57 / M47N / M57N / 204D4 / 306D22002-2008
BMWX3 (E83)M47 / M57 / M47N / M57N / 204D4 / 306D22004-2010
BMWX5 (E70)M47 / M57 / M47N / M57N / 204D4 / 306D22007-2013
BMW1 Series (E87) / 3 Series (E46/E90/E91)M47 / M57 / M47N / M57N / 204D4 / 306D22003-2008
BMW5 Series (E60/E61) / 7 Series (E65/E66)M47 / M57 / M47N / M57N / 204D4 / 306D22003-2007
BMWX3 (E83) / X5 (E53)M47 / M57 / M47N / M57N / 204D4 / 306D22003-2007
BMW7 Series (E65/E66)M47 / M57 / M47N / M57N / 204D4 / 306D22002-2005
BMWX5 (E53)M47 / M57 / M47N / M57N / 204D4 / 306D22003-2006
BMW3 Series (E90/E91/E92/E93)M47 / M57 / M47N / M57N / 204D4 / 306D22005-2010
BMWX6 (E71)M47 / M57 / M47N / M57N / 204D4 / 306D22007-2010
Land RoverFreelander I (L314)M47 / M57 / M47N / M57N / 204D4 / 306D22000-2006
OpelOmega B (V94)M47 / M57 / M47N / M57N / 204D4 / 306D22001-2003
Rover75 (RJ)M47 / M57 / M47N / M57N / 204D4 / 306D21999-2005
BMW5 Series (E39)M47 / M57 / M47N / M57N / 204D4 / 306D21998-2004
BMW7 Series (E38)M47 / M57 / M47N / M57N / 204D4 / 306D21998-2001
Land RoverRange Rover III (L322)M47 / M57 / M47N / M57N / 204D4 / 306D22002-2006
Land RoverFreelander I (LN)M47 / M57 / M47N / M57N / 204D4 / 306D22000-2006
Rover75 / 75 TourerM47 / M57 / M47N / M57N / 204D4 / 306D22001-2005
OpelOmega B 2.5 DTIM47 / M57 / M47N / M57N / 204D4 / 306D22001-2003
BMW5 Series Touring (E39)M47 / M57 / M47N / M57N / 204D4 / 306D22000-2004
BMW1 Series (E81/E87)M47 / M57 / M47N / M57N / 204D4 / 306D22004-2007
BMW3 Series (E90/E91)M47 / M57 / M47N / M57N / 204D4 / 306D22005-2007
BMW5 Series (E60)M47 / M57 / M47N / M57N / 204D4 / 306D22004-2007
BMW5 Series Touring (E61)M47 / M57 / M47N / M57N / 204D4 / 306D22004-2007
03

Installation, Tightening Torque & Re-torque Protocol

Strict torque compliance is mandatory on BMW M47 / M57 (2.0d / 3.0d M47N / M57N / 204D4 / 306D2) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:

🔧 Recommended Assembly Torques:
  • Hold-down clamp bolt: 9 N·m + 90° (cold state). Always clean the cylinder head recess with an injector seat reamer.
  • High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
  • Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
⚠️ ECU IMA Coding Requirement:

After fitting replacement injectors on BMW M47 / M57 (2.0d / 3.0d M47N / M57N / 204D4 / 306D2), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.

04

Technical Diagnostics FAQ for BMW M47 / M57 (2.0d / 3.0d M47N / M57N / 204D4 / 306D2)

What DTC fault codes indicate a failing injector on BMW M47 / M57 (2.0d / 3.0d M47N / M57N / 204D4 / 306D2)?

The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.

Can sister SKUs within the BMW M47 / M57 (2.0d / 3.0d M47N / M57N / 204D4 / 306D2) family be interchanged?

Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and F00VC01304 control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.

Which specific Bosch injectors fit the BMW M47 / M57 (2.0d / 3.0d M47N / M57N / 204D4 / 306D2) engine?

The verified genuine Bosch common-rail injectors engineered for the BMW M47 / M57 (2.0d / 3.0d M47N / M57N / 204D4 / 306D2) engine family are: