Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L) Diesel Injector
Cross-Reference & Technical Specs
Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the Deutz TCD 2012 diesel engine family.
All Verified Part Numbers for Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L)
The following 2 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.
Bosch 0445120067 Common Rail Injector for Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L) →
BOSCH CRIF00RJ01479Nozzle Code: DLLA146P1581Bosch 0445120066 Common Rail Injector for Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L) →
BOSCH CRIF00RJ01479Nozzle Code: DLLA144P1565| Part Number (SKU) | Primary OE Reference | Control Valve | Nozzle Code |
|---|---|---|---|
| 04290987, 4290987, 04290987KZ | F00RJ01479 | DLLA146P1581 | |
| 20798114, 20430583, 20798683 | F00RJ01479 | DLLA144P1565 |
Verified Vehicle Compatibility
| Make / Manufacturer | Vehicle Model & Platform | Engine Specification | Model Years |
|---|---|---|---|
| Volvo | EC200 / EC210 / EC210B Crawler Excavator | Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L) | 2006-2016 |
| Deutz | TCD 2012 L04 2V / L06 2V Industrial Engine | Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L) | 2005-2016 |
| Renault | Midlum / Premium Distribution | Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L) | 2006-2014 |
| Volvo | EC240B / EC240C Excavator | Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L) | 2005-2016 |
| Volvo | EC290B / EC290C Excavator | Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L) | 2005-2016 |
| Volvo | L110E / L120E Wheel Loader | Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L) | 2006-2015 |
| Renault | Midlum / Premium DXi 7 Truck | Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L) | 2006-2014 |
Installation, Tightening Torque & Re-torque Protocol
Strict torque compliance is mandatory on Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:
- Hold-down clamp bolt: 32 N·m (cold state). Always clean the cylinder head recess with an injector seat reamer.
- High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
- Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
After fitting replacement injectors on Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.
Technical Diagnostics FAQ for Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L)
What DTC fault codes indicate a failing injector on Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L)?
The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.
Can sister SKUs within the Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L) family be interchanged?
Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and F00RJ01479 control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.
Which specific Bosch injectors fit the Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L) engine?
The verified genuine Bosch common-rail injectors engineered for the Deutz TCD 2012 / 2013 & Volvo D6E / D7E (4.8L - 7.2L) engine family are:
- Bosch 0445120067 Common Rail Injector → (OE: 04290987, 4290987, 04290987KZ, 20798683, VOE20798683, 7420798683, 961204640054) — Control Valve: F00RJ01479, Nozzle Code: DLLA146P1581
- Bosch 0445120066 Common Rail Injector → (OE: 20798114, 20430583, 20798683, 04289311, 04290986, 7420798114) — Control Valve: F00RJ01479, Nozzle Code: DLLA144P1565