ENGINE FAMILY SPECIFICATIONBOSCH COMMON RAILEuro 5 / Euro 6 / Tier 2 Bin 5 / ULEV II

Audi / VW / Porsche EA837 3.0L V6 Supercharged TFSI (CGWB / CTUB / CREC) Diesel Injector
Cross-Reference & Technical Specs

Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the Audi diesel engine family.

Primary OEMBOSCH
Control ValveHigh-Pressure Solenoid Actuated Multi-Hole Nozzle
Nozzle CodeSee Product Detail
Peak Pressure150 bar
Hold-Down Torque10 N·m
01

All Verified Part Numbers for Audi / VW / Porsche EA837 3.0L V6 Supercharged TFSI (CGWB / CTUB / CREC)

The following 5 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.

Part Number (SKU)Primary OE ReferenceControl ValveNozzle Code
0261500076, 0261500077, 06E906036CHigh-Pressure Solenoid Actuated Multi-Hole NozzleSee Product Detail
06E127025N, 06E127025AB, 06E127025JIntegrated Fuel Metering Solenoid Valve N290See Product Detail
06E906036C, 0261500043, 0261500044High-Pressure Solenoid Actuated Multi-Hole NozzleSee Product Detail
06E906036K, 06E906036Q, 0261500160High-Pressure Solenoid Actuated Multi-Hole NozzleSee Product Detail
06E127025AC, 0261520228, HPP0012High-Pressure Solenoid Actuated Multi-Hole NozzleSee Product Detail
02

Verified Vehicle Compatibility

Make / ManufacturerVehicle Model & PlatformEngine SpecificationModel Years
AudiS4 (B8 / B8.5)3.0 TFSI Supercharged EA8372010-2016
AudiA6 3.0T (C7)3.0 TFSI Supercharged EA8372012-2018
AudiQ7 3.0T (4L)3.0 TFSI Supercharged EA8372011-2015
PorscheCayenne S E-Hybrid (92A)3.0L Supercharged V6 + Hybrid2011-2018
AudiS4 / S5 B8 B8.5Audi / VW / Porsche EA837 3.0L V6 Supercharged TFSI (CGWB / CTUB / CREC)2010-2017
AudiA6 C7 / A7 4G8Audi / VW / Porsche EA837 3.0L V6 Supercharged TFSI (CGWB / CTUB / CREC)2012-2018
AudiQ7 4L / SQ5 8RAudi / VW / Porsche EA837 3.0L V6 Supercharged TFSI (CGWB / CTUB / CREC)2011-2017
PorscheCayenne / PanameraAudi / VW / Porsche EA837 3.0L V6 Supercharged TFSI (CGWB / CTUB / CREC)2011-2018
03

Installation, Tightening Torque & Re-torque Protocol

Strict torque compliance is mandatory on Audi / VW / Porsche EA837 3.0L V6 Supercharged TFSI (CGWB / CTUB / CREC) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:

🔧 Recommended Assembly Torques:
  • Hold-down clamp bolt: 10 N·m (cold state). Always clean the cylinder head recess with an injector seat reamer.
  • High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
  • Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
⚠️ ECU IMA Coding Requirement:

After fitting replacement injectors on Audi / VW / Porsche EA837 3.0L V6 Supercharged TFSI (CGWB / CTUB / CREC), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.

04

Technical Diagnostics FAQ for Audi / VW / Porsche EA837 3.0L V6 Supercharged TFSI (CGWB / CTUB / CREC)

What DTC fault codes indicate a failing injector on Audi / VW / Porsche EA837 3.0L V6 Supercharged TFSI (CGWB / CTUB / CREC)?

The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.

Can sister SKUs within the Audi / VW / Porsche EA837 3.0L V6 Supercharged TFSI (CGWB / CTUB / CREC) family be interchanged?

Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and High-Pressure Solenoid Actuated Multi-Hole Nozzle control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.

Which specific Bosch injectors fit the Audi / VW / Porsche EA837 3.0L V6 Supercharged TFSI (CGWB / CTUB / CREC) engine?

The verified genuine Bosch common-rail injectors engineered for the Audi / VW / Porsche EA837 3.0L V6 Supercharged TFSI (CGWB / CTUB / CREC) engine family are: