Hino J05E / J08E (5.1L / 7.7L) Diesel Injector
Cross-Reference & Technical Specs
Authoritative technical specifications, verified Bosch part numbers, control valve stamping codes, nozzle spray orifices, and hold-down tightening torque for the Hino J05E / J08E diesel engine family.
All Verified Part Numbers for Hino J05E / J08E (5.1L / 7.7L)
The following 3 common-rail injector assemblies are calibrated for this engine family. Click any SKU to view individual test bench flow curves, sister cross-references, and vehicle applications.
Plate 10# / Denso G2 Valve PlateNozzle Code: DLLA155P848Plate 10# / Denso G2 Valve PlateNozzle Code: DLLA155P868Plate #10Nozzle Code: DLLA153P885| Part Number (SKU) | Primary OE Reference | Control Valve | Nozzle Code |
|---|---|---|---|
| 23670-E0050, 23670-E0051, 23670-E0052 | Plate 10# / Denso G2 Valve Plate | DLLA155P848 | |
| 23670-E0180, 23670-E0181, 23670-E0182 | Plate 10# / Denso G2 Valve Plate | DLLA155P868 | |
| 095000-6071, 095000-6072, DCRI106070 | Plate #10 | DLLA153P885 |
Verified Vehicle Compatibility
| Make / Manufacturer | Vehicle Model & Platform | Engine Specification | Model Years |
|---|---|---|---|
| Kobelco | SK200-8 / SK200LC-8 Crawler Excavator | Hino J05E / J08E (5.1L / 7.7L) | 2006-2015 |
| Kobelco | SK210-8 / SK210LC-8 Crawler Excavator | Hino J05E / J08E (5.1L / 7.7L) | 2006-2015 |
| Kobelco | SK250-8 / SK260-8 Crawler Excavator | Hino J05E / J08E (5.1L / 7.7L) | 2006-2015 |
| Kobelco | SK330-8 / SK350-8 Heavy Excavator | Hino J05E / J08E (5.1L / 7.7L) | 2006-2015 |
| New Holland | E215B / E245B Crawler Excavator | Hino J05E / J08E (5.1L / 7.7L) | 2007-2016 |
| Hino | 500 Series / Ranger Medium-Duty Truck | Hino J05E / J08E (5.1L / 7.7L) | 2005-2016 |
| Kobelco | SK330-8 / SK330LC-8 Crawler Excavator | Hino J05E / J08E (5.1L / 7.7L) | 2006-2016 |
| Kobelco | SK350-8 / SK350LC-8 Heavy Excavator | Hino J05E / J08E (5.1L / 7.7L) | 2006-2016 |
| Kobelco | SK380D-8 Mining Crawler Excavator | Hino J05E / J08E (5.1L / 7.7L) | 2007-2016 |
| Hino | 500 Series Ranger Heavy Truck | Hino J05E / J08E (5.1L / 7.7L) | 2006-2016 |
| Hino | 700 Series Heavy Commercial Truck | Hino J05E / J08E (5.1L / 7.7L) | 2006-2015 |
| Hino | 500 Series Medium / Heavy Commercial Trucks | Hino J05E / J08E (5.1L / 7.7L) | 2006-2018 |
| Kobelco | SK330-8 / SK350-8 Hydraulic Excavators | Hino J05E / J08E (5.1L / 7.7L) | 2006-2018 |
Installation, Tightening Torque & Re-torque Protocol
Strict torque compliance is mandatory on Hino J05E / J08E (5.1L / 7.7L) common-rail cylinder heads. Over-torquing stretches the injector body or strips the head clamping threads, while under-torquing allows combustion blow-by past the copper sealing washer:
- Hold-down clamp bolt: 30 N·m (cold state). Always clean the cylinder head recess with an injector seat reamer.
- High-pressure rail flare nut: 25-30 N·m using a dedicated 17 mm line wrench.
- Return leak-off banjo bolt: 9-12 N·m with fresh copper washers on both sides of the banjo union.
After fitting replacement injectors on Hino J05E / J08E (5.1L / 7.7L), generate or program the cylinder-specific IMA calibration code into the engine ECU using an OEM-level scan tool (Bosch KTS, Renault CLIP, or VAG-COM) to prevent cylinder power imbalance and rough idle.
Technical Diagnostics FAQ for Hino J05E / J08E (5.1L / 7.7L)
What DTC fault codes indicate a failing injector on Hino J05E / J08E (5.1L / 7.7L)?
The most frequent fault codes are P0201 through P0204 (Injector Circuit Malfunction on Cylinders 1-4), P2146/P2149 (Injector Group Supply Voltage Error), and P0087 (Fuel Rail Pressure Low due to excessive internal leak-off). Measure solenoid coil resistance across the pins (0.5-1.5 Ω) and perform a graduated-bottle dynamic leak-back test to pinpoint the leaking cylinder.
Can sister SKUs within the Hino J05E / J08E (5.1L / 7.7L) family be interchanged?
Not unless explicitly confirmed on the vehicle build plate. While sister SKUs share the same physical outer envelope and Plate 10# / Denso G2 Valve Plate control valve, they differ in nozzle spray orifice angle and factory IMA flow calibration. Mixing sister SKUs on the same engine block can trigger rough idle, elevated exhaust gas temperatures (EGT), and MOT emissions failure.
Which specific Bosch injectors fit the Hino J05E / J08E (5.1L / 7.7L) engine?
The verified genuine Bosch common-rail injectors engineered for the Hino J05E / J08E (5.1L / 7.7L) engine family are:
- Bosch 095000-6353 Common Rail Injector → (OE: 23670-E0050, 23670-E0051, 23670-E0052, 23670-E0053, 23670-E0054, 23670-E0055, VH23670E0050, VH23670E0051, VH23670E0052, VH23670E0053, VH23670E0054, 095000-6350, 095000-6351, 095000-6352, 095000-6354, 095000-6355) — Control Valve: Plate 10# / Denso G2 Valve Plate, Nozzle Code: DLLA155P848
- Bosch 095000-6593 Common Rail Injector → (OE: 23670-E0180, 23670-E0181, 23670-E0182, 23670-E0183, 23670-E0184, 23670-E0185, VH23670E0180, VH23670E0181, VH23670E0182, VH23670E0183, VH23670E0184, 095000-6590, 095000-6591, 095000-6592, 095000-6594, 095000-6595) — Control Valve: Plate 10# / Denso G2 Valve Plate, Nozzle Code: DLLA155P868
- Bosch 095000-6070 Common Rail Injector → (OE: 095000-6071, 095000-6072, DCRI106070, 23670-E0010, 23670-E0011, 23670-E0012, 23670-E0013, 23670-E0014, VH23670E0010, VH23670E0011) — Control Valve: Plate #10, Nozzle Code: DLLA153P885